Swivel castor with wheel locking brake, 80 mm - 200 mm, 80 kg - 250 kg
Part number: JXPC 1603 6443/B
Technical data
| Diameter | 160 mm |
| Wheel width | 50 mm |
| Hub length | 64 mm |
| Height | 195 mm |
| Offset | 55 mm |
| Top plate dimensions | 135 x 112 mm |
| Top plate hole diameter | 11 mm |
| Dist. between holes | 105 x 75,80 mm |
| Brake swivel radius | 145 mm |
| Load capacity | 200 kg |
| Weight | 2.16 kg |
Technical description
- Swivel fork of deep drawn stainless steel with wheel brake.
- Swivelhead with sealed precision ball bearing, grease nippel
- and O-ring seal. In case of extreme conditions
- (like frequent jet cleaning) maintenance by relubrication
- is necessary
Wheel
- Dark grey Polypropyleene wheel with grey antistatic rubber tyre
- (Performa, Shore A 65 - 70) with two steel deep groove ball bearings
Variants
| Diameter | Wheel width | Hub length | Height | Offset | Top plate dimensions | Top plate hole diameter | Dist. between holes | Brake swivel radius | Load capacity | Weight | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JXPC 0802 7000/B | 80 mm | 32 mm | 45 mm | 110 mm | 35 mm | 105 x 85 mm | 9 mm | 80 x 60 mm | 120 mm | 80 kg | 0.86 g |
| JXPC 1002 7000/B | 100 mm | 32 mm | 45 mm | 130 mm | 40 mm | 105 x 85 mm | 9 mm | 80 x 60 mm | 120 mm | 120 kg | 0.95 g |
| JXPC 1252 7000/B | 125 mm | 40 mm | 45 mm | 160 mm | 45 mm | 105 x 85 mm | 9 mm | 80 x 60 mm | 120 mm | 150 kg | 1.08 g |
| JXPC 1603 6443/B | 160 mm | 50 mm | 64 mm | 195 mm | 55 mm | 135 x 112 mm | 11 mm | 105 x 75,80 mm | 145 mm | 200 kg | 2.16 g |
| JXPC 2003 6443/B | 200 mm | 50 mm | 64 mm | 235 mm | 60 mm | 135 x 112 mm | 11 mm | 105 x 75,80 mm | 145 mm | 250 kg | 3.54 g |
